Tom,
  On the problem with sequential.err2.exp with cam 212 b, what 
appears to be happening is that layer 1 of module 0 (closest to the
interface) first gets its multipurpose register A programmed
to be scan input; then, after module 1 is programmed, layer 1 of
module 0 is reprogrammed so that its multipurpose A is status in 
(because module 0 should ignore the scan input pin).  Since the 
output select of pin p53 is the lsb of the MPA reg, this pin 
switches from rsout to lsout--not the desired result! 

                             Doug