|------------------------------------------------------------------------------|
|                      DESIGN  RULE  CHECK  ERROR  REPORT                      |
|                                                                    Page   1  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:13:01 1994  |
|------------------------------------------------------------------------------|
|==============================================================================|
| Package to Package Spacing violations:                                       |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
| drc location|       |                  p  a  c  k  a  g  e                   |
|  x   |  y   |       |       ref des        |      name       |   x   |   y   |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 2100.0 4355.0             FRECTANGLE         ZIP-28            2150.0  5400.0
                           U35                SOJ28             2200.0  4725.0
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 3050.0 4355.0             FRECTANGLE         ZIP-28            3100.0  5400.0
                           U36                SOJ28             3150.0  4725.0
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|------------------------------------------------------------------------------|
|                      DESIGN  RULE  CHECK  ERROR  REPORT                      |
|                                                                    Page   2  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:13:01 1994  |
|------------------------------------------------------------------------------|
|==============================================================================|
| Etch-to-pad violations -- Different Net                                      |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|   drc location  |sepa| element |         element location          |   net   |
|    x   |    y   |ratn|identfctn|   x1   |   y1   |   x2   |   y2   |   name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to SMD Pin Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass TOP
   2200.0   2825.0    0 U3.32       2175.0   2825.0                   
                        CLINE       2200.0   2825.0   2375.0   2650.0 UN1ACQ37759PQ4
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to SMD Pin Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass TOP
   2200.0   3175.0    0 U3.39       2175.0   3175.0                   
                        CLINE       2200.0   3175.0   2375.0   3350.0 UN1ACQ37759PQ7
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to SMD Pin Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass TOP
   1827.5   3225.0    4 U3.21       1800.0   3225.0                   
                        CLINE       1850.0   3225.0   2075.0   3450.0 UN1BOXCONN9PDISPVALIDN0
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to Thru Pin Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass BOTTOM
   2100.0    371.0    0 J2.2        2100.0    400.0                   UN1JUMPER2ON44PJ20
                        CLINE       2100.0    300.0   2100.0    400.0 GND
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to Thru Pin Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass BOTTOM
   2700.0    371.0    0 CLINE       2700.0    300.0   2700.0    400.0 UN1BOXCONN55PPIX0
                        J4.2        2700.0    400.0                   UN15MERGE57PB0
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to Thru Pin Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass BOTTOM
   7171.0    450.0    0 CLINE       7200.0    450.0   7150.0    450.0 DATA7
                        S7.1        7200.0    450.0                   FI15
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|------------------------------------------------------------------------------|
|                      DESIGN  RULE  CHECK  ERROR  REPORT                      |
|                                                                    Page   3  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:13:01 1994  |
|------------------------------------------------------------------------------|
|==============================================================================|
| Etch-to-pad violations -- Different Net                                      |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|   drc location  |sepa| element |         element location          |   net   |
|    x   |    y   |ratn|identfctn|   x1   |   y1   |   x2   |   y2   |   name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to Thru Pin Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass TOP
   2054.5   2970.5  0.4 CLINE       1800.0   2975.0   2050.0   2975.0 
                        U3.6        2075.0   2950.0                   UN1ACQ37759PQ2
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to Thru Pin Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass TOP
   2054.5   3029.5  0.4 CLINE       1800.0   3025.0   2050.0   3025.0 
                        U3.5        2075.0   3050.0                   UN1ACQ37759PQ1
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to Thru Pin Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass TOP
   2354.5   2970.5  0.4 CLINE       2175.0   2975.0   2350.0   2975.0 
                        U3.15       2375.0   2950.0                   UN1ACQ37759PQ5
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to Thru Pin Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass TOP
   2354.5   3029.5  0.4 CLINE       2175.0   3025.0   2350.0   3025.0 
                        U3.16       2375.0   3050.0                   UN1ACQ37759PQ6
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|------------------------------------------------------------------------------|
|                      DESIGN  RULE  CHECK  ERROR  REPORT                      |
|                                                                    Page   4  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:13:01 1994  |
|------------------------------------------------------------------------------|
|==============================================================================|
| Etch-to-etch violations -- Different Net                                     |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|   drc location  |sepa| element |         element location          |   net   |
|    x   |    y   |ratn|identfctn|   x1   |   y1   |   x2   |   y2   |   name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to Line Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass BOTTOM
   7150.0    350.0    0 CLINE       7100.0    400.0   7150.0    350.0 DATA7
                        CLINE       7200.0    350.0   7150.0    350.0 FI7
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to Line Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass BOTTOM
   7200.0    450.0    0 CLINE       7200.0    450.0   7150.0    450.0 DATA7
                        CLINE       7162.6    487.4   7200.0    450.0 FI15
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to Line Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass BOTTOM
   7250.0    200.0    0 CLINE       7200.0    250.0   7250.0    200.0 DATA6
                        CLINE       7250.0    200.0   7300.0    200.0 FI6
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to Line Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass BOTTOM
   7250.0    300.0    0 CLINE       7200.0    250.0   7250.0    300.0 DATA6
                        CLINE       7250.0    300.0   7300.0    300.0 FI14
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to Line Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass BOTTOM
   7350.0    350.0    0 CLINE       7300.0    400.0   7350.0    350.0 DATA5
                        CLINE       7350.0    350.0   7400.0    350.0 FI5
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to Line Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass BOTTOM
   7350.0    450.0    0 CLINE       7300.0    400.0   7350.0    450.0 DATA5
                        CLINE       7350.0    450.0   7400.0    450.0 FI13
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|------------------------------------------------------------------------------|
|                      DESIGN  RULE  CHECK  ERROR  REPORT                      |
|                                                                    Page   5  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:13:01 1994  |
|------------------------------------------------------------------------------|
|==============================================================================|
| Etch-to-etch violations -- Different Net                                     |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|   drc location  |sepa| element |         element location          |   net   |
|    x   |    y   |ratn|identfctn|   x1   |   y1   |   x2   |   y2   |   name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to Line Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass BOTTOM
   7450.0    200.0    0 CLINE       7400.0    250.0   7450.0    200.0 DATA4
                        CLINE       7450.0    200.0   7500.0    200.0 FI4
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to Line Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass BOTTOM
   7450.0    300.0    0 CLINE       7400.0    250.0   7450.0    300.0 DATA4
                        CLINE       7450.0    300.0   7500.0    300.0 FI12
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to Line Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass BOTTOM
   7550.0    350.0    0 CLINE       7500.0    400.0   7550.0    350.0 DATA3
                        CLINE       7550.0    350.0   7600.0    350.0 FI3
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to Line Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass BOTTOM
   7550.0    450.0    0 CLINE       7500.0    400.0   7550.0    450.0 DATA3
                        CLINE       7550.0    450.0   7600.0    450.0 FI11
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to Line Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass BOTTOM
   7650.0    200.0    0 CLINE       7600.0    250.0   7650.0    200.0 DATA2
                        CLINE       7650.0    200.0   7700.0    200.0 FI2
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to Line Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass BOTTOM
   7650.0    300.0    0 CLINE       7600.0    250.0   7650.0    300.0 DATA2
                        CLINE       7650.0    300.0   7700.0    300.0 FI10
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|------------------------------------------------------------------------------|
|                      DESIGN  RULE  CHECK  ERROR  REPORT                      |
|                                                                    Page   6  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:13:01 1994  |
|------------------------------------------------------------------------------|
|==============================================================================|
| Etch-to-etch violations -- Different Net                                     |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|   drc location  |sepa| element |         element location          |   net   |
|    x   |    y   |ratn|identfctn|   x1   |   y1   |   x2   |   y2   |   name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to Line Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass BOTTOM
   7750.0    350.0    0 CLINE       7700.0    400.0   7750.0    350.0 DATA1
                        CLINE       7750.0    350.0   7800.0    350.0 FI1
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to Line Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass BOTTOM
   7750.0    450.0    0 CLINE       7700.0    400.0   7750.0    450.0 DATA1
                        CLINE       7750.0    450.0   7800.0    450.0 FI9
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to Line Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass BOTTOM
   7850.0    200.0    0 CLINE       7800.0    250.0   7850.0    200.0 DATA0
                        CLINE       7850.0    200.0   7900.0    200.0 FI0
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to Line Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass BOTTOM
   7850.0    300.0    0 CLINE       7800.0    250.0   7850.0    300.0 DATA0
                        CLINE       7850.0    300.0   7900.0    300.0 FI8
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to Line Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass TOP
   1850.0   3225.0    0 CLINE       1800.0   3225.0   1850.0   3225.0 
                        CLINE       1850.0   3225.0   2075.0   3450.0 UN1BOXCONN9PDISPVALIDN0
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to Line Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass TOP
   1900.0   2825.0    0 CLINE       1800.0   2825.0   1900.0   2825.0 
                        CLINE       1900.0   2825.0   2075.0   2650.0 UN1ACQ37759PQ3
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|------------------------------------------------------------------------------|
|                      DESIGN  RULE  CHECK  ERROR  REPORT                      |
|                                                                    Page   7  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:13:01 1994  |
|------------------------------------------------------------------------------|
|==============================================================================|
| Etch-to-etch violations -- Different Net                                     |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|   drc location  |sepa| element |         element location          |   net   |
|    x   |    y   |ratn|identfctn|   x1   |   y1   |   x2   |   y2   |   name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to Line Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass TOP
   1900.0   3175.0    0 CLINE       1800.0   3175.0   1900.0   3175.0 
                        CLINE       1900.0   3175.0   2075.0   3350.0 UN1ACQ37759PQ0
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to Line Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass TOP
   1950.0   2875.0    0 CLINE       1800.0   2875.0   1950.0   2875.0 
                        CLINE       1950.0   2875.0   2075.0   2750.0 DISP3
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to Line Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass TOP
   1950.0   3125.0    0 CLINE       1800.0   3125.0   1950.0   3125.0 
                        CLINE       1950.0   3125.0   2075.0   3250.0 DISP0
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to Line Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass TOP
   2000.0   2925.0    0 CLINE       1800.0   2925.0   2000.0   2925.0 
                        CLINE       2000.0   2925.0   2075.0   2850.0 DISP2
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to Line Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass TOP
   2000.0   3075.0    0 CLINE       1800.0   3075.0   2000.0   3075.0 
                        CLINE       2000.0   3075.0   2075.0   3150.0 DISP1
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to Line Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass TOP
   2175.0   2750.0    0 CLINE       2175.0   2750.0   2175.0   2775.0 
                        CLINE       2175.0   2750.0   2375.0   2550.0 UN15MERGE57PD0
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|------------------------------------------------------------------------------|
|                      DESIGN  RULE  CHECK  ERROR  REPORT                      |
|                                                                    Page   8  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:13:01 1994  |
|------------------------------------------------------------------------------|
|==============================================================================|
| Etch-to-etch violations -- Different Net                                     |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|   drc location  |sepa| element |         element location          |   net   |
|    x   |    y   |ratn|identfctn|   x1   |   y1   |   x2   |   y2   |   name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to Line Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass TOP
   2200.0   2825.0    0 CLINE       2175.0   2825.0   2200.0   2825.0 
                        CLINE       2200.0   2825.0   2375.0   2650.0 UN1ACQ37759PQ4
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to Line Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass TOP
   2200.0   3175.0    0 CLINE       2175.0   3175.0   2200.0   3175.0 
                        CLINE       2200.0   3175.0   2375.0   3350.0 UN1ACQ37759PQ7
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to Line Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass TOP
   2250.0   2875.0    0 CLINE       2175.0   2875.0   2250.0   2875.0 
                        CLINE       2250.0   2875.0   2375.0   2750.0 DISP4
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to Line Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass TOP
   2250.0   3125.0    0 CLINE       2175.0   3125.0   2250.0   3125.0 
                        CLINE       2250.0   3125.0   2375.0   3250.0 DISP7
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to Line Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass TOP
   2300.0   2925.0    0 CLINE       2175.0   2925.0   2300.0   2925.0 
                        CLINE       2300.0   2925.0   2375.0   2850.0 DISP5
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to Line Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass TOP
   2300.0   3075.0    0 CLINE       2175.0   3075.0   2300.0   3075.0 
                        CLINE       2300.0   3075.0   2375.0   3150.0 DISP6
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|------------------------------------------------------------------------------|
|                      DESIGN  RULE  CHECK  ERROR  REPORT                      |
|                                                                    Page   9  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:13:01 1994  |
|------------------------------------------------------------------------------|
|==============================================================================|
| Etch-to-etch violations -- Different Net                                     |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|   drc location  |sepa| element |         element location          |   net   |
|    x   |    y   |ratn|identfctn|   x1   |   y1   |   x2   |   y2   |   name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to Shape Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass GND
   4775.0   5425.0    0 SHAPE       -750.0   -600.0   8312.5   5600.0 GND
                        TEXT        4775.0   5425.0                   
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Line to Shape Spacing
 Required spacing 6 MIL
 Constraint set name DEFAULT
 Etch subclass VCC
   4837.5   5412.5    0 SHAPE       -750.0   -600.0   8287.5   5600.0 VCC
                        TEXT        4837.5   5412.5                   
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|------------------------------------------------------------------------------|
|                      DESIGN  RULE  CHECK  ERROR  REPORT                      |
|                                                                    Page  10  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:13:01 1994  |
|------------------------------------------------------------------------------|
|==============================================================================|
| Net data violations:                                                         |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|   drc location  |sepa| element |   element location or extent      |member of|
|    x   |    y   |ratn|identfctn|   x1   |   y1   |   x2   |   y2   |   net   |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 Maximum Neck Length
 Required value 0 MIL
 Constraint set name DEFAULT
 Etch subclass BOTTOM
   2100.0    350.0  100 CLINE       2100.0    300.0   2100.0    400.0 GND
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |

|------------------------------------------------------------------------------|
|   end of    DESIGN  RULE  CHECK  ERROR  REPORT                               |
|------------------------------------------------------------------------------|
|      Error count summary:                                                    |
|------------------------------------------------------------------------------|
|   Package to Package                           2                             |
|   Etch-to-pad -- different net                10                             |
|   Etch-to-etch -- different net               32                             |
|   Net Data Constraints                         1                             |
|------------------------------------------------------------------------------|
|   total DRC error count                       45                             |
|------------------------------------------------------------------------------|
