|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page   1  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: 109MTGNP                 Type NON-VIA        Inner-pads FIXED      |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 TOP                PAD    CIRCLE     40.0  40.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 internal_pad_def   PAD    CIRCLE     40.0  40.0   0.0   0.0                    
                    T-REL  CIRCLE     40.0  40.0   0.0   0.0                    
                    A-PAD  CIRCLE    200.0 200.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 VCC                PAD    CIRCLE     40.0  40.0   0.0   0.0                    
                    T-REL  CIRCLE     40.0  40.0   0.0   0.0                    
                    A-PAD  CIRCLE    200.0 200.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L3                 PAD    CIRCLE     40.0  40.0   0.0   0.0                    
                    T-REL  CIRCLE     40.0  40.0   0.0   0.0                    
                    A-PAD  CIRCLE    200.0 200.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L4                 PAD    CIRCLE     40.0  40.0   0.0   0.0                    
                    T-REL  CIRCLE     40.0  40.0   0.0   0.0                    
                    A-PAD  CIRCLE    200.0 200.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 GND                PAD    CIRCLE     40.0  40.0   0.0   0.0                    
                    T-REL  CIRCLE     40.0  40.0   0.0   0.0                    
                    A-PAD  CIRCLE    200.0 200.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM             PAD    CIRCLE     40.0  40.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-SOLDER-MASK    PAD    CIRCLE    200.0 200.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-SOLDER-MASK PAD    CIRCLE    200.0 200.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-PASTE-MASK     PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-PASTE-MASK  PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-FILM-MASK      PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-FILM-MASK   PAD                0.0   0.0   0.0   0.0                    
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page   2  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: 109MTGNP                 Type NON-VIA        Inner-pads FIXED      |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|------------------------------------------------------------------------------|
|    DRILL:                                                                    |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|      hole     |  plating  |      display/plot        size      | hole offset |
|      size     |   type    |   figure  |character| wdt  | hgt   |  x   |   y  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
      109.0      NON_PLATED  DIAMOND         J      125.0   125.0    0.0    0.0
|------------------------------------------------------------------------------|
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page   3  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: 15X60SM                  Type NON-VIA        Inner-pads FIXED      |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 TOP                PAD    OBLONG     15.0  60.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 internal_pad_def   PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 VCC                PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L3                 PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L4                 PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 GND                PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM             PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-SOLDER-MASK    PAD    OBLONG     23.0  68.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-SOLDER-MASK PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-PASTE-MASK     PAD    OBLONG     15.0  60.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-PASTE-MASK  PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-FILM-MASK      PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-FILM-MASK   PAD                0.0   0.0   0.0   0.0                    
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page   4  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: 15X60SM                  Type NON-VIA        Inner-pads FIXED      |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|------------------------------------------------------------------------------|
|    DRILL:                                                                    |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|      hole     |  plating  |      display/plot        size      | hole offset |
|      size     |   type    |   figure  |character| wdt  | hgt   |  x   |   y  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
      0.0        NON_PLATED                           0.0     0.0    0.0    0.0
|------------------------------------------------------------------------------|
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page   5  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: 15X67SM                  Type NON-VIA        Inner-pads FIXED      |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 TOP                PAD    OBLONG     15.0  67.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 internal_pad_def   PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 VCC                PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L3                 PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L4                 PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 GND                PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM             PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-SOLDER-MASK    PAD    OBLONG     23.0  75.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-SOLDER-MASK PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-PASTE-MASK     PAD    OBLONG     15.0  67.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-PASTE-MASK  PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-FILM-MASK      PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-FILM-MASK   PAD                0.0   0.0   0.0   0.0                    
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page   6  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: 15X67SM                  Type NON-VIA        Inner-pads FIXED      |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|------------------------------------------------------------------------------|
|    DRILL:                                                                    |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|      hole     |  plating  |      display/plot        size      | hole offset |
|      size     |   type    |   figure  |character| wdt  | hgt   |  x   |   y  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
      0.0        NON_PLATED                           0.0     0.0    0.0    0.0
|------------------------------------------------------------------------------|
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page   7  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: 25X80SM                  Type NON-VIA        Inner-pads FIXED      |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 TOP                PAD    OBLONG     25.0  80.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 internal_pad_def   PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 VCC                PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L3                 PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L4                 PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 GND                PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM             PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-SOLDER-MASK    PAD    OBLONG     33.0  88.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-SOLDER-MASK PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-PASTE-MASK     PAD    OBLONG     25.0  80.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-PASTE-MASK  PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-FILM-MASK      PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-FILM-MASK   PAD                0.0   0.0   0.0   0.0                    
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page   8  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: 25X80SM                  Type NON-VIA        Inner-pads FIXED      |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|------------------------------------------------------------------------------|
|    DRILL:                                                                    |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|      hole     |  plating  |      display/plot        size      | hole offset |
|      size     |   type    |   figure  |character| wdt  | hgt   |  x   |   y  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
      0.0        NON_PLATED                           0.0     0.0    0.0    0.0
|------------------------------------------------------------------------------|
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page   9  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: 35X100SM                 Type NON-VIA        Inner-pads OPTIONAL   |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 TOP                PAD    OBLONG     35.0 100.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 internal_pad_def   PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 VCC                PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L3                 PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L4                 PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 GND                PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM             PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-SOLDER-MASK    PAD    OBLONG     43.0 108.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-SOLDER-MASK PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-PASTE-MASK     PAD    OBLONG     35.0 100.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-PASTE-MASK  PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-FILM-MASK      PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-FILM-MASK   PAD                0.0   0.0   0.0   0.0                    
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  10  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: 35X100SM                 Type NON-VIA        Inner-pads OPTIONAL   |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|------------------------------------------------------------------------------|
|    DRILL:                                                                    |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|      hole     |  plating  |      display/plot        size      | hole offset |
|      size     |   type    |   figure  |character| wdt  | hgt   |  x   |   y  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
      0.0        PLATED                               0.0     0.0    0.0    0.0
|------------------------------------------------------------------------------|
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  11  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: 40C20D                   Type NON-VIA        Inner-pads OPTIONAL   |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 TOP                PAD    CIRCLE     40.0  40.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 internal_pad_def   PAD    CIRCLE     40.0  40.0   0.0   0.0                    
                    T-REL  CIRCLE     60.0  60.0   0.0   0.0 T90                
                    A-PAD  CIRCLE     60.0  60.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 VCC                PAD    CIRCLE     40.0  40.0   0.0   0.0                    
                    T-REL  CIRCLE     10.0  10.0   0.0   0.0 DIRECT             
                    A-PAD  CIRCLE     62.0  62.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L3                 PAD    CIRCLE     40.0  40.0   0.0   0.0                    
                    T-REL  CIRCLE     62.0  62.0   0.0   0.0 TR1                
                    A-PAD  CIRCLE     62.0  62.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L4                 PAD    CIRCLE     40.0  40.0   0.0   0.0                    
                    T-REL  CIRCLE     62.0  62.0   0.0   0.0 TR1                
                    A-PAD  CIRCLE     62.0  62.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 GND                PAD    CIRCLE     40.0  40.0   0.0   0.0                    
                    T-REL  CIRCLE     10.0  10.0   0.0   0.0 DIRECT             
                    A-PAD  CIRCLE     62.0  62.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM             PAD    CIRCLE     40.0  40.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-SOLDER-MASK    PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-SOLDER-MASK PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-PASTE-MASK     PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-PASTE-MASK  PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-FILM-MASK      PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-FILM-MASK   PAD                0.0   0.0   0.0   0.0                    
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  12  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: 40C20D                   Type NON-VIA        Inner-pads OPTIONAL   |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|------------------------------------------------------------------------------|
|    DRILL:                                                                    |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|      hole     |  plating  |      display/plot        size      | hole offset |
|      size     |   type    |   figure  |character| wdt  | hgt   |  x   |   y  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
      20.0       PLATED      CROSS                   50.0    50.0    0.0    0.0
|------------------------------------------------------------------------------|
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  13  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: 40S20D                   Type NON-VIA        Inner-pads OPTIONAL   |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 TOP                PAD    SQUARE     40.0  40.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 internal_pad_def   PAD    CIRCLE     40.0  40.0   0.0   0.0                    
                    T-REL  CIRCLE     60.0  60.0   0.0   0.0 T90                
                    A-PAD  CIRCLE     60.0  60.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 VCC                PAD    CIRCLE     40.0  40.0   0.0   0.0                    
                    T-REL  CIRCLE     10.0  10.0   0.0   0.0 DIRECT             
                    A-PAD  CIRCLE     62.0  62.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L3                 PAD    CIRCLE     40.0  40.0   0.0   0.0                    
                    T-REL  CIRCLE     62.0  62.0   0.0   0.0 TR1                
                    A-PAD  CIRCLE     62.0  62.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L4                 PAD    CIRCLE     40.0  40.0   0.0   0.0                    
                    T-REL  CIRCLE     62.0  62.0   0.0   0.0 TR1                
                    A-PAD  CIRCLE     62.0  62.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 GND                PAD    CIRCLE     40.0  40.0   0.0   0.0                    
                    T-REL  CIRCLE     10.0  10.0   0.0   0.0 DIRECT             
                    A-PAD  CIRCLE     62.0  62.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM             PAD    SQUARE     40.0  40.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-SOLDER-MASK    PAD    SQUARE     50.0  50.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-SOLDER-MASK PAD    SQUARE     50.0  50.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-PASTE-MASK     PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-PASTE-MASK  PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-FILM-MASK      PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-FILM-MASK   PAD                0.0   0.0   0.0   0.0                    
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  14  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: 40S20D                   Type NON-VIA        Inner-pads OPTIONAL   |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|------------------------------------------------------------------------------|
|    DRILL:                                                                    |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|      hole     |  plating  |      display/plot        size      | hole offset |
|      size     |   type    |   figure  |character| wdt  | hgt   |  x   |   y  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
      20.0       PLATED      CIRCLE                  50.0    50.0    0.0    0.0
|------------------------------------------------------------------------------|
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  15  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: 58C37D                   Type NON-VIA        Inner-pads FIXED      |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 TOP                PAD    CIRCLE     58.0  58.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 internal_pad_def   PAD    CIRCLE     58.0  58.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 VCC                PAD    CIRCLE     58.0  58.0   0.0   0.0                    
                    T-REL  CIRCLE     58.0  58.0   0.0   0.0 TR1                
                    A-PAD  CIRCLE     58.0  58.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L3                 PAD    CIRCLE     58.0  58.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L4                 PAD    CIRCLE     58.0  58.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 GND                PAD    CIRCLE     58.0  58.0   0.0   0.0                    
                    T-REL  CIRCLE     58.0  58.0   0.0   0.0 TR1                
                    A-PAD  CIRCLE     58.0  58.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM             PAD    CIRCLE     58.0  58.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-SOLDER-MASK    PAD    CIRCLE     64.0  64.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-SOLDER-MASK PAD    CIRCLE     64.0  64.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-PASTE-MASK     PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-PASTE-MASK  PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-FILM-MASK      PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-FILM-MASK   PAD                0.0   0.0   0.0   0.0                    
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  16  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: 58C37D                   Type NON-VIA        Inner-pads FIXED      |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|------------------------------------------------------------------------------|
|    DRILL:                                                                    |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|      hole     |  plating  |      display/plot        size      | hole offset |
|      size     |   type    |   figure  |character| wdt  | hgt   |  x   |   y  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
      37.0       PLATED      CIRCLE                  50.0    50.0    0.0    0.0
|------------------------------------------------------------------------------|
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  17  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: 58S37D                   Type NON-VIA        Inner-pads FIXED      |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 TOP                PAD    SQUARE     58.0  58.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 internal_pad_def   PAD    SQUARE     58.0  58.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 VCC                PAD    SQUARE     58.0  58.0   0.0   0.0                    
                    T-REL  CIRCLE     58.0  58.0   0.0   0.0 TR1                
                    A-PAD  CIRCLE     58.0  58.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L3                 PAD    SQUARE     58.0  58.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L4                 PAD    SQUARE     58.0  58.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 GND                PAD    SQUARE     58.0  58.0   0.0   0.0                    
                    T-REL  CIRCLE     58.0  58.0   0.0   0.0 TR1                
                    A-PAD  CIRCLE     58.0  58.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM             PAD    SQUARE     58.0  58.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-SOLDER-MASK    PAD    SQUARE     64.0  64.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-SOLDER-MASK PAD    SQUARE     64.0  64.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-PASTE-MASK     PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-PASTE-MASK  PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-FILM-MASK      PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-FILM-MASK   PAD                0.0   0.0   0.0   0.0                    
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  18  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: 58S37D                   Type NON-VIA        Inner-pads FIXED      |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|------------------------------------------------------------------------------|
|    DRILL:                                                                    |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|      hole     |  plating  |      display/plot        size      | hole offset |
|      size     |   type    |   figure  |character| wdt  | hgt   |  x   |   y  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
      37.0       PLATED      CIRCLE                  50.0    50.0    0.0    0.0
|------------------------------------------------------------------------------|
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  19  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: 60X15SM                  Type NON-VIA        Inner-pads OPTIONAL   |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 TOP                PAD    OBLONG     60.0  15.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 internal_pad_def   PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 VCC                PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L3                 PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L4                 PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 GND                PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM             PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-SOLDER-MASK    PAD    OBLONG     68.0  23.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-SOLDER-MASK PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-PASTE-MASK     PAD    OBLONG     60.0  15.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-PASTE-MASK  PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-FILM-MASK      PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-FILM-MASK   PAD                0.0   0.0   0.0   0.0                    
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  20  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: 60X15SM                  Type NON-VIA        Inner-pads OPTIONAL   |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|------------------------------------------------------------------------------|
|    DRILL:                                                                    |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|      hole     |  plating  |      display/plot        size      | hole offset |
|      size     |   type    |   figure  |character| wdt  | hgt   |  x   |   y  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
      0.0        PLATED                               0.0     0.0    0.0    0.0
|------------------------------------------------------------------------------|
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  21  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: 62C37D                   Type NON-VIA        Inner-pads FIXED      |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 TOP                PAD    CIRCLE     62.0  62.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 internal_pad_def   PAD    CIRCLE     62.0  62.0   0.0   0.0                    
                    T-REL  CIRCLE     62.0  62.0   0.0   0.0 TR1                
                    A-PAD  CIRCLE     80.0  80.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 VCC                PAD    CIRCLE     62.0  62.0   0.0   0.0                    
                    T-REL  CIRCLE     62.0  62.0   0.0   0.0 TR1                
                    A-PAD  CIRCLE     80.0  80.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L3                 PAD    CIRCLE     62.0  62.0   0.0   0.0                    
                    T-REL  CIRCLE     62.0  62.0   0.0   0.0 TR1                
                    A-PAD  CIRCLE     80.0  80.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L4                 PAD    CIRCLE     62.0  62.0   0.0   0.0                    
                    T-REL  CIRCLE     62.0  62.0   0.0   0.0 TR1                
                    A-PAD  CIRCLE     80.0  80.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 GND                PAD    CIRCLE     62.0  62.0   0.0   0.0                    
                    T-REL  CIRCLE     62.0  62.0   0.0   0.0 TR1                
                    A-PAD  CIRCLE     80.0  80.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM             PAD    CIRCLE     62.0  62.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-SOLDER-MASK    PAD    CIRCLE     75.0  75.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-SOLDER-MASK PAD    CIRCLE     75.0  75.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-PASTE-MASK     PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-PASTE-MASK  PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-FILM-MASK      PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-FILM-MASK   PAD                0.0   0.0   0.0   0.0                    
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  22  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: 62C37D                   Type NON-VIA        Inner-pads FIXED      |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|------------------------------------------------------------------------------|
|    DRILL:                                                                    |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|      hole     |  plating  |      display/plot        size      | hole offset |
|      size     |   type    |   figure  |character| wdt  | hgt   |  x   |   y  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
      37.0       PLATED      CIRCLE                  50.0    50.0    0.0    0.0
|------------------------------------------------------------------------------|
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  23  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: 62S37D                   Type NON-VIA        Inner-pads FIXED      |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 TOP                PAD    SQUARE     62.0  62.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 internal_pad_def   PAD    CIRCLE     62.0  62.0   0.0   0.0                    
                    T-REL  CIRCLE     62.0  62.0   0.0   0.0 TR1                
                    A-PAD  CIRCLE     80.0  80.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 VCC                PAD    CIRCLE     62.0  62.0   0.0   0.0                    
                    T-REL  CIRCLE     62.0  62.0   0.0   0.0 TR1                
                    A-PAD  CIRCLE     80.0  80.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L3                 PAD    CIRCLE     62.0  62.0   0.0   0.0                    
                    T-REL  CIRCLE     62.0  62.0   0.0   0.0 TR1                
                    A-PAD  CIRCLE     80.0  80.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L4                 PAD    CIRCLE     62.0  62.0   0.0   0.0                    
                    T-REL  CIRCLE     62.0  62.0   0.0   0.0 TR1                
                    A-PAD  CIRCLE     80.0  80.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 GND                PAD    CIRCLE     62.0  62.0   0.0   0.0                    
                    T-REL  CIRCLE     62.0  62.0   0.0   0.0 TR1                
                    A-PAD  CIRCLE     80.0  80.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM             PAD    SQUARE     62.0  62.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-SOLDER-MASK    PAD    SQUARE     75.0  75.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-SOLDER-MASK PAD    SQUARE     75.0  75.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-PASTE-MASK     PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-PASTE-MASK  PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-FILM-MASK      PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-FILM-MASK   PAD                0.0   0.0   0.0   0.0                    
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  24  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: 62S37D                   Type NON-VIA        Inner-pads FIXED      |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|------------------------------------------------------------------------------|
|    DRILL:                                                                    |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|      hole     |  plating  |      display/plot        size      | hole offset |
|      size     |   type    |   figure  |character| wdt  | hgt   |  x   |   y  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
      37.0       PLATED      CIRCLE                  50.0    50.0    0.0    0.0
|------------------------------------------------------------------------------|
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  25  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: 67X15SM                  Type NON-VIA        Inner-pads OPTIONAL   |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 TOP                PAD    OBLONG     67.0  15.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 internal_pad_def   PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 VCC                PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L3                 PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L4                 PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 GND                PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM             PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-SOLDER-MASK    PAD    OBLONG     75.0  23.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-SOLDER-MASK PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-PASTE-MASK     PAD    OBLONG     67.0  15.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-PASTE-MASK  PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-FILM-MASK      PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-FILM-MASK   PAD                0.0   0.0   0.0   0.0                    
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  26  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: 67X15SM                  Type NON-VIA        Inner-pads OPTIONAL   |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|------------------------------------------------------------------------------|
|    DRILL:                                                                    |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|      hole     |  plating  |      display/plot        size      | hole offset |
|      size     |   type    |   figure  |character| wdt  | hgt   |  x   |   y  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
      0.0        PLATED                               0.0     0.0    0.0    0.0
|------------------------------------------------------------------------------|
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  27  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: 80X25SM                  Type NON-VIA        Inner-pads OPTIONAL   |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 TOP                PAD    OBLONG     80.0  25.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 internal_pad_def   PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 VCC                PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L3                 PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L4                 PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 GND                PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM             PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-SOLDER-MASK    PAD    OBLONG     88.0  33.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-SOLDER-MASK PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-PASTE-MASK     PAD    OBLONG     80.0  25.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-PASTE-MASK  PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-FILM-MASK      PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-FILM-MASK   PAD                0.0   0.0   0.0   0.0                    
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  28  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: 80X25SM                  Type NON-VIA        Inner-pads OPTIONAL   |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|------------------------------------------------------------------------------|
|    DRILL:                                                                    |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|      hole     |  plating  |      display/plot        size      | hole offset |
|      size     |   type    |   figure  |character| wdt  | hgt   |  x   |   y  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
      0.0        PLATED                               0.0     0.0    0.0    0.0
|------------------------------------------------------------------------------|
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  29  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: 93MTGNP                  Type NON-VIA        Inner-pads FIXED      |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 TOP                PAD    CIRCLE     40.0  40.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 internal_pad_def   PAD    CIRCLE     40.0  40.0   0.0   0.0                    
                    T-REL  CIRCLE     40.0  40.0   0.0   0.0                    
                    A-PAD  CIRCLE    200.0 200.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 VCC                PAD    CIRCLE     40.0  40.0   0.0   0.0                    
                    T-REL  CIRCLE     40.0  40.0   0.0   0.0                    
                    A-PAD  CIRCLE    200.0 200.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L3                 PAD    CIRCLE     40.0  40.0   0.0   0.0                    
                    T-REL  CIRCLE     40.0  40.0   0.0   0.0                    
                    A-PAD  CIRCLE    200.0 200.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L4                 PAD    CIRCLE     40.0  40.0   0.0   0.0                    
                    T-REL  CIRCLE     40.0  40.0   0.0   0.0                    
                    A-PAD  CIRCLE    200.0 200.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 GND                PAD    CIRCLE     40.0  40.0   0.0   0.0                    
                    T-REL  CIRCLE     40.0  40.0   0.0   0.0                    
                    A-PAD  CIRCLE    200.0 200.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM             PAD    CIRCLE     40.0  40.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-SOLDER-MASK    PAD    CIRCLE    140.0 140.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-SOLDER-MASK PAD    CIRCLE    140.0 140.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-PASTE-MASK     PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-PASTE-MASK  PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-FILM-MASK      PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-FILM-MASK   PAD                0.0   0.0   0.0   0.0                    
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  30  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: 93MTGNP                  Type NON-VIA        Inner-pads FIXED      |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|------------------------------------------------------------------------------|
|    DRILL:                                                                    |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|      hole     |  plating  |      display/plot        size      | hole offset |
|      size     |   type    |   figure  |character| wdt  | hgt   |  x   |   y  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
      93.0       NON_PLATED  CIRCLE          A      100.0   100.0    0.0    0.0
|------------------------------------------------------------------------------|
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  31  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: REC47X118                Type NON-VIA        Inner-pads OPTIONAL   |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 TOP                PAD    RECTANGLE  47.2 118.1   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 internal_pad_def   PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 VCC                PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L3                 PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L4                 PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 GND                PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM             PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-SOLDER-MASK    PAD    RECTANGLE  48.4 119.3   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-SOLDER-MASK PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-PASTE-MASK     PAD    RECTANGLE  47.2 118.1   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-PASTE-MASK  PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-FILM-MASK      PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-FILM-MASK   PAD                0.0   0.0   0.0   0.0                    
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  32  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: REC47X118                Type NON-VIA        Inner-pads OPTIONAL   |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|------------------------------------------------------------------------------|
|    DRILL:                                                                    |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|      hole     |  plating  |      display/plot        size      | hole offset |
|      size     |   type    |   figure  |character| wdt  | hgt   |  x   |   y  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
      0.0        PLATED                               0.0     0.0    0.0    0.0
|------------------------------------------------------------------------------|
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  33  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: REC60X120                Type NON-VIA        Inner-pads OPTIONAL   |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 TOP                PAD    RECTANGLE  60.0 120.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 internal_pad_def   PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 VCC                PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L3                 PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L4                 PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 GND                PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM             PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-SOLDER-MASK    PAD    RECTANGLE  66.0 126.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-SOLDER-MASK PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-PASTE-MASK     PAD    RECTANGLE  60.0 120.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-PASTE-MASK  PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-FILM-MASK      PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-FILM-MASK   PAD                0.0   0.0   0.0   0.0                    
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  34  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: REC60X120                Type NON-VIA        Inner-pads OPTIONAL   |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|------------------------------------------------------------------------------|
|    DRILL:                                                                    |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|      hole     |  plating  |      display/plot        size      | hole offset |
|      size     |   type    |   figure  |character| wdt  | hgt   |  x   |   y  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
      0.0        PLATED                               0.0     0.0    0.0    0.0
|------------------------------------------------------------------------------|
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  35  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: REC90X75                 Type NON-VIA        Inner-pads OPTIONAL   |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 TOP                PAD    RECTANGLE  90.0  75.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 internal_pad_def   PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 VCC                PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L3                 PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L4                 PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 GND                PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM             PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-SOLDER-MASK    PAD    RECTANGLE  96.0  81.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-SOLDER-MASK PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-PASTE-MASK     PAD    RECTANGLE  90.0  75.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-PASTE-MASK  PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-FILM-MASK      PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-FILM-MASK   PAD                0.0   0.0   0.0   0.0                    
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  36  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: REC90X75                 Type NON-VIA        Inner-pads OPTIONAL   |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|------------------------------------------------------------------------------|
|    DRILL:                                                                    |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|      hole     |  plating  |      display/plot        size      | hole offset |
|      size     |   type    |   figure  |character| wdt  | hgt   |  x   |   y  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
      0.0        PLATED                               0.0     0.0    0.0    0.0
|------------------------------------------------------------------------------|
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  37  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: REC95X102                Type NON-VIA        Inner-pads OPTIONAL   |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 TOP                PAD    RECTANGLE  95.0 102.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 internal_pad_def   PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 VCC                PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L3                 PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L4                 PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 GND                PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM             PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-SOLDER-MASK    PAD    RECTANGLE 101.0 108.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-SOLDER-MASK PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-PASTE-MASK     PAD    RECTANGLE  95.0 102.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-PASTE-MASK  PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-FILM-MASK      PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-FILM-MASK   PAD                0.0   0.0   0.0   0.0                    
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  38  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: REC95X102                Type NON-VIA        Inner-pads OPTIONAL   |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|------------------------------------------------------------------------------|
|    DRILL:                                                                    |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|      hole     |  plating  |      display/plot        size      | hole offset |
|      size     |   type    |   figure  |character| wdt  | hgt   |  x   |   y  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
      0.0        PLATED                               0.0     0.0    0.0    0.0
|------------------------------------------------------------------------------|
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  39  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: SMD40_40                 Type NON-VIA        Inner-pads FIXED      |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 TOP                PAD    RECTANGLE  40.0  40.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 internal_pad_def   PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 VCC                PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L3                 PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L4                 PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 GND                PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM             PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-SOLDER-MASK    PAD    RECTANGLE  45.0  45.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-SOLDER-MASK PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-PASTE-MASK     PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-PASTE-MASK  PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-FILM-MASK      PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-FILM-MASK   PAD                0.0   0.0   0.0   0.0                    
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  40  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: SMD40_40                 Type NON-VIA        Inner-pads FIXED      |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|------------------------------------------------------------------------------|
|    DRILL:                                                                    |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|      hole     |  plating  |      display/plot        size      | hole offset |
|      size     |   type    |   figure  |character| wdt  | hgt   |  x   |   y  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
      0.0        NON_PLATED                           0.0     0.0    0.0    0.0
|------------------------------------------------------------------------------|
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  41  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: SMD50_120                Type NON-VIA        Inner-pads FIXED      |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 TOP                PAD    RECTANGLE  50.0 120.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 internal_pad_def   PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 VCC                PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L3                 PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L4                 PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 GND                PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM             PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-SOLDER-MASK    PAD    RECTANGLE  55.0 125.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-SOLDER-MASK PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-PASTE-MASK     PAD    RECTANGLE  50.0 120.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-PASTE-MASK  PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-FILM-MASK      PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-FILM-MASK   PAD                0.0   0.0   0.0   0.0                    
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  42  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: SMD50_120                Type NON-VIA        Inner-pads FIXED      |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|------------------------------------------------------------------------------|
|    DRILL:                                                                    |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|      hole     |  plating  |      display/plot        size      | hole offset |
|      size     |   type    |   figure  |character| wdt  | hgt   |  x   |   y  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
      0.0        PLATED                               0.0     0.0    0.0    0.0
|------------------------------------------------------------------------------|
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  43  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: SMD50_25                 Type NON-VIA        Inner-pads FIXED      |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 TOP                PAD    RECTANGLE  50.0  25.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 internal_pad_def   PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 VCC                PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L3                 PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L4                 PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 GND                PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM             PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-SOLDER-MASK    PAD    RECTANGLE  55.0  30.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-SOLDER-MASK PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-PASTE-MASK     PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-PASTE-MASK  PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-FILM-MASK      PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-FILM-MASK   PAD                0.0   0.0   0.0   0.0                    
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  44  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: SMD50_25                 Type NON-VIA        Inner-pads FIXED      |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|------------------------------------------------------------------------------|
|    DRILL:                                                                    |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|      hole     |  plating  |      display/plot        size      | hole offset |
|      size     |   type    |   figure  |character| wdt  | hgt   |  x   |   y  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
      0.0        NON_PLATED                           0.0     0.0    0.0    0.0
|------------------------------------------------------------------------------|
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  45  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: SMD50_30                 Type NON-VIA        Inner-pads FIXED      |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 TOP                PAD    RECTANGLE  50.0  30.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 internal_pad_def   PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 VCC                PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L3                 PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L4                 PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 GND                PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM             PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-SOLDER-MASK    PAD    RECTANGLE  55.0  35.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-SOLDER-MASK PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-PASTE-MASK     PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-PASTE-MASK  PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-FILM-MASK      PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-FILM-MASK   PAD                0.0   0.0   0.0   0.0                    
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  46  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: SMD50_30                 Type NON-VIA        Inner-pads FIXED      |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|------------------------------------------------------------------------------|
|    DRILL:                                                                    |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|      hole     |  plating  |      display/plot        size      | hole offset |
|      size     |   type    |   figure  |character| wdt  | hgt   |  x   |   y  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
      0.0        NON_PLATED                           0.0     0.0    0.0    0.0
|------------------------------------------------------------------------------|
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  47  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: SMOB80X25                Type NON-VIA        Inner-pads FIXED      |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 TOP                PAD    OBLONG     80.0  25.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 internal_pad_def   PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 VCC                PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L3                 PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L4                 PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 GND                PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM             PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-SOLDER-MASK    PAD    OBLONG     86.0  31.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-SOLDER-MASK PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-PASTE-MASK     PAD    OBLONG     80.0  25.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-PASTE-MASK  PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-FILM-MASK      PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-FILM-MASK   PAD                0.0   0.0   0.0   0.0                    
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  48  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: SMOB80X25                Type NON-VIA        Inner-pads FIXED      |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|------------------------------------------------------------------------------|
|    DRILL:                                                                    |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|      hole     |  plating  |      display/plot        size      | hole offset |
|      size     |   type    |   figure  |character| wdt  | hgt   |  x   |   y  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
      0.0        NON_PLATED                           0.0     0.0    0.0    0.0
|------------------------------------------------------------------------------|
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  49  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: SQ100                    Type NON-VIA        Inner-pads OPTIONAL   |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 TOP                PAD    SQUARE    100.0 100.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 internal_pad_def   PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 VCC                PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L3                 PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L4                 PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 GND                PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM             PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-SOLDER-MASK    PAD    SQUARE    106.0 106.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-SOLDER-MASK PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-PASTE-MASK     PAD    SQUARE    100.0 100.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-PASTE-MASK  PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-FILM-MASK      PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-FILM-MASK   PAD                0.0   0.0   0.0   0.0                    
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  50  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: SQ100                    Type NON-VIA        Inner-pads OPTIONAL   |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|------------------------------------------------------------------------------|
|    DRILL:                                                                    |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|      hole     |  plating  |      display/plot        size      | hole offset |
|      size     |   type    |   figure  |character| wdt  | hgt   |  x   |   y  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
      0.0        PLATED                               0.0     0.0    0.0    0.0
|------------------------------------------------------------------------------|
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  51  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: SQ63                     Type NON-VIA        Inner-pads OPTIONAL   |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 TOP                PAD    SQUARE     63.0  63.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 internal_pad_def   PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 VCC                PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L3                 PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L4                 PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 GND                PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM             PAD                0.0   0.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-SOLDER-MASK    PAD    SQUARE     68.0  68.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-SOLDER-MASK PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-PASTE-MASK     PAD    SQUARE     63.0  63.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-PASTE-MASK  PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-FILM-MASK      PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-FILM-MASK   PAD                0.0   0.0   0.0   0.0                    
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  52  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: SQ63                     Type NON-VIA        Inner-pads OPTIONAL   |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|------------------------------------------------------------------------------|
|    DRILL:                                                                    |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|      hole     |  plating  |      display/plot        size      | hole offset |
|      size     |   type    |   figure  |character| wdt  | hgt   |  x   |   y  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
      0.0        PLATED                               0.0     0.0    0.0    0.0
|------------------------------------------------------------------------------|
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  53  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: VIA                      Type NON-VIA        Inner-pads FIXED      |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
 TOP                PAD    CIRCLE     55.0  55.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 internal_pad_def   PAD    CIRCLE     55.0  55.0   0.0   0.0                    
                    T-REL  CIRCLE     55.0  55.0   0.0   0.0 TR1                
                    A-PAD  CIRCLE     80.0  80.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 VCC                PAD    CIRCLE     55.0  55.0   0.0   0.0                    
                    T-REL  CIRCLE     55.0  55.0   0.0   0.0 TR1                
                    A-PAD  CIRCLE     80.0  80.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L3                 PAD    CIRCLE     55.0  55.0   0.0   0.0                    
                    T-REL  CIRCLE     55.0  55.0   0.0   0.0 TR1                
                    A-PAD  CIRCLE     80.0  80.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 L4                 PAD    CIRCLE     55.0  55.0   0.0   0.0                    
                    T-REL  CIRCLE     55.0  55.0   0.0   0.0 TR1                
                    A-PAD  CIRCLE     80.0  80.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 GND                PAD    CIRCLE     55.0  55.0   0.0   0.0                    
                    T-REL  CIRCLE     55.0  55.0   0.0   0.0 TR1                
                    A-PAD  CIRCLE     80.0  80.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM             PAD    CIRCLE     55.0  55.0   0.0   0.0                    
                    T-REL              0.0   0.0   0.0   0.0                    
                    A-PAD              0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-SOLDER-MASK    PAD    CIRCLE     72.0  72.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-SOLDER-MASK PAD    CIRCLE     72.0  72.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-PASTE-MASK     PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-PASTE-MASK  PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 TOP-FILM-MASK      PAD                0.0   0.0   0.0   0.0                    
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  
 BOTTOM-FILM-MASK   PAD                0.0   0.0   0.0   0.0                    
|------------------------------------------------------------------------------|
|                         PADSTACK  DEFINITION  REPORT                         |
|                                                                    Page  54  |
|------------------------------------------------------------------------------|
|  /am/net/im/fab/frank/boxcon/pcb/boxfinalc.brd                               |
|  dimensions in mils                                Fri Nov 11 17:12:17 1994  |
|------------------------------------------------------------------------------|
| Pad name: VIA                      Type NON-VIA        Inner-pads FIXED      |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|    subclass or   | pad  |outline  |   size    |  offset   |  flash  |  shape |
|mask-type or drill| type |geometry | wdt | hgt |  x  |  y  |  name   |  name  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|------------------------------------------------------------------------------|
|    DRILL:                                                                    |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|      hole     |  plating  |      display/plot        size      | hole offset |
|      size     |   type    |   figure  |character| wdt  | hgt   |  x   |   y  |
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
      32.0       PLATED      HEXAGON_Y               50.0    50.0    0.0    0.0
|------------------------------------------------------------------------------|
|------------------------------------------------------------------------------|
|   total padstack definitions 27                                              |
|------------------------------------------------------------------------------|
