COMMAND NAME:

        angle
iangle

USAGE:
        angle [+ -] <degree value>
iangle [+ -] <degree value>

        The angle and iangle commands let you input angle
values. These commands can be applied for rotating elements while
in an application that supports rotation. For example, move, ad
d pin, and add symbol applications
have Rotate in popup menus. These commands can also
be used for applications expecting angular input, where angular dynamics
is active and position readout shows an angle value.  As a substitute
for Rotate, angle and iangle provide the
equivalent of selecting the Rotate popup, spinning the
element to the appropriate angle, then picking to select that angle.
When in an application that expects an angular input,  angle
and iangle provide the equivalent to picking to select an
angle. For example, spin rotates a selected element and
expects angular input. You can enter angle or iangle
instead of entering a pick.

        Note: Elements that do not have a stored angle, for example,
line segments, rotate the same as for iangle.

        The following command increments iangle by value ([+ -] is
optional).

        [+] indicates clockwise (default). [-] indicates counterclockwise.

        iangle [+ -] <value in degrees>
