Basic Functionality:
1 analog PID loop. 2 analog potentiometer buffering and
differentiation blocks.
Parts List
--
pdf
-- plain
text Schematics and Layout: m4_fb.pdf Known bugs: The joint point connectors are not spaced
correctly. Three 3pin pot connectors were merged into one. The spacing makes
this difficult. Therefore the middle connector should be a right angle
connector.
Power one brick is really hard to remove if it breaks. It is recommended to
raise it up a bit while soldering so you can easily slip a small screwdriver
underneath the edge if it breaks. Fabrication:
CFC, Inc.
179 Bear Hill Road
Waltham, MA 02154-1001
(617)890-1878
FAX: (617)890-7098